Ester plasticizers are typically monomerics, but those designated as Plasthall P-Series are polymerics. Hallstar has a broad product portfolio with a wide range of functionality in both elastomers and PVC. A subset of this brand is our Plasthall PR-Series which represents the group of products designed as Phthalate Replacements.
Hallstar, a global leader in design and synthesis of polymer modifiers, has developed a new polymeric plasticizer for use in fluoroelastomer (FKM) compounds. Plasthall® P-920 and its dry version, Suprmix® Plasthall® P-920, acts as a process aid to:
• improve efficiency of extrusion
• reduce viscosity
• decrease torque and energy consumption
Plasthall 100 is the monoester isooctyl tallate. It has excellent compatiblity in polychloroprene as well as chlorosulfonated polyethylene and natural rubber. In polychloroprene Plasthall 100 offers good transmission fluid and water resistance and very good low temperature performance.
Plasthall® 190 is an ultra-stable, non-phthalate plasticizer, designed to enhance the performance of your adhesive, sealant and coating formulations. Plasthall® 190 is an efficient plasticizer that will reduce viscosity and provide extremely low temperature performance. It is typically used in cross-linked systems like PU, SMP, Epoxy-Polyol, Urethane-Acrylate and does not impact physicals after aging or weathering.
Plasthall P-643 is a low to medium molecular weight polyester plasticizer. It is well suited for applications requiring FDA acceptance. Plasthall P-643 has extraction and migration resistance superior to typical monomeric plasticizers especially where stress cracking resistance is important.
SUPRMIX Plasthall 226(DBEEA) is a compound consisting of 72% Plasthall 226 and 28% substrate. SUPRMIXes permit liquids to be handles as powders. As SUPRMIX is incorporated into a rubber compound the active ingredient is released from its carrier allowing the active ingredient to function in the same manner as it would if it had been incorporated as a neat material.
Suprmix® PlastHall® DBS a free-flowing powder by using our amorphous silica carrier, weighing, delivery, and incorporation headaches are minimized. Suprmix® PlastHall® DBS is so efficiently incorporated during the mixing steps that often the PHR (Parts per Hundred Rubber) level can be reduced while the same physicals and durometer hardness are retained
SUPRMIX Plasthall DIDP is a compound consisting of 72% Plasthall DIDP and 28% substrate. SUPRMIXes permit liquids to be handles as powders. As SUPRMIX is incorporated into a rubber compound the active ingredient is released from its carrier allowing the active ingredient to function in the same manner as it would if it had been incorporated as a neat material.
© 2023 Hallstar. All Rights Reserved.
Distributor Login