Plasthall® ELO is epoxidized linseed oil with high compatibility in PVC, offering good heat and light stability.
Plasthall® ELO is recommended for food contact and medical applications where metallic stabilizers are not used or used in small quantities. The remarkable heat stability of Plasthall® ELO gives the compounder more latitude in these formulations.
| Acid Value, mg KOH / g | 0.36 |
| Appearance | Clear |
| Iodine Number, | 1.60 |
| Oxirane Oxygen, % | 9.6 |
| Packaging |
|
|---|
| Plasticizer, pphr | 67 |
| Shore A Hardness | 63 |
| Low Temperature Brittle Point, °C | -20 |
| Percent Change by: | |
| Volatilization | 0.3 |
| Kerosene extraction | 1.0 |
| Distilled water extraction | +0.4 |
The information presented herein is believed to be accurate and reliable, but no warranty or guarantee, expressed or implied, is made regarding the information or the performance of any product. Further, nothing contained herein shall be taken as any inducement or recommendation to use, manufacture or sell that may infringe any patents or any other proprietary rights now or hereafter in existence, nor to imply compliance with any regulatory requirements
The Hallstar Company - 120 South Riverside Plaza Suite 1620 - Chicago, IL 60606-3911 USA
Tel.: 877 427 4255 (International n.: +1 312 385 4494) - Fax: +1 330 929 3616 - E-mail: customerservice@hallstar.com Web Site: hallstar.com
© 2026 Hallstar. All Rights Reserved.
Distributor Login
Print 
PDF