Distributor Login
  • Sample Requests
  • Contact Us
Hallstar
  • Solutions
  • Expertise
  • Resource Center
  • Sustainability
  • News & Events
Print Friendly Version of this pagePrint Get a PDF version of this webpagePDF

PLASTHALL® P-550

Common Name: POLYESTER GLUTARATE
Product Code: 3571
Brand: Plasthall®

  • Description
  • Typical Properties
  • Performance Properties
  • Global Compliance
  • Used In

Plasthall P-550 is a medium molecular weight, low viscosity polymeric plasticizer which has very low volatility while imparting low hardness.

Plasthall P-550 provides excellent process ability, efficiency and compatibility in a variety of thermoplastic and thermosetting resins. It is especially recommended in situations where resistance to extraction with solvents and water are required.

Acid Value, mg KOH / g 0.4
Appearance Clear
Color, APHA 112
Moisture, % 0.02
Refractive Index, 25°C 1.463
Specific Gravity, 25°C 1.070
Viscosity at 25°C, TBR 32
Packaging
  • 55 gallon drum - 475lbs
  • 5 gallon pail - 40lbs
  • Tote - --lbs
  • Bulk - --lbs

PVC

Plasticizer, pphr 67
Shore A Hardness 75
Low Temperature Brittle Point, °C -11
Tensile Strength, psi 2450
Ultimate Elong., % 370
Percent Change by: 
Volatilization -2.2
Oil extraction -3.8
Hexane Extraction -1.9
Distilled water extraction -1.0
Soapy water extraction -11
High humidity -0.5
Migration 
Polystyrene Excellent
ABS Good

Nitrile

Plasticizer, pphr 20
Shore A Hardness 63
Low Temperature Brittle Point, °C -33
Tensile Strength, psi 2150
Ultimate Elong., % 410
Percent Change by: 
Volatilization -1.8
ASTM #1 Oil -4.0
ASTM #3 Oil +6.7
Distilled water extraction -1.6
Fuel C extraction -10

Global Compliance:

  • EU
  • USA

Polymers:

  • Cellulose nitrate
  • Chlorosulfonated polyethylene
  • Nitrile
  • Polyvinyl chloride
  • Vinyl chloride acetate

Applications:

  • Adhesive and sealant
  • Automotive belts
  • Decals
  • Electrical tape
  • O-rings
  • Outdoor furniture
  • Refrigerator gasket

The information presented herein is believed to be accurate and reliable, but no warranty or guarantee, expressed or implied, is made regarding the information or the performance of any product. Further, nothing contained herein shall be taken as any inducement or recommendation to use, manufacture or sell that may infringe any patents or any other proprietary rights now or hereafter in existence, nor to imply compliance with any regulatory requirements

The Hallstar Company - 120 South Riverside Plaza Suite 1620 - Chicago, IL 60606-3911 USA

Tel.: 877 427 4255 (International n.: +1 312 385 4494) - Fax: +1 330 929 3616 - E-mail: customerservice@hallstar.com Web Site: hallstar.com

Request a Sample

Safety Data Sheets

Product Documents

  • Environmental Impact of Using Suprmix® Versus Liquid
  • Ester Plasticizers for Elastomers
  • Ester Plasticizers for Hydrophilic Print Roll Compounds
  • Ester Plasticizers for Polar Elastomers with Emphasis on Low Temperature
  • Esters for PVC Coatings: Food Packaging
  • HallGreen® Esters in PVC
  • Hallstar Phthalate Alternatives Comparison in PVC
  • Improved Processing with Powder Liquid Dispersions
  • PVC Basics
  • Phthalate Alternatives Comparison in Medium ACN Nitrile
  • Plasticizers for PVC Brochure
  • Plasticizers for PVC Foam
  • Stress-Cracking Resistance of Polycarbonate in Contact With Plasticized PVC Compounds
  • TP-Series Plasticizers
[Reset Filters]
  • Industrial Solutions
    • Elastomer Modifiers
    • Thermoplastic Modifiers
    • Adhesive/Sealant Modifiers
    • Coatings Modifiers
    • Other Market Solutions
    • Trends
  • Areas of Expertise
    • Renewable Plasticizers/Esters
    • Permanent Plasticizers
    • Phthalate Replacements
    • Custom Ester Design
    • Regulatory Understanding and Capability
  • Resource Center
    • Case Studies
    • Glossary of Terms
    • Technical Documents
    • Videos
  • Contact Us
    • Locations
    • Distributors
    • Careers

© 2025 Hallstar.  All Rights Reserved.

  • About Hallstar Corporate
  • Privacy & Cookies Statement
  • Privacy & Cookies Statement – Mandarin
  • Disclaimer