Plasthall® DIDP is used to impart good heat aging and polar fluid resistance. The excellent heat aging properties are due to Plasthall® DIDP’s low volatility.
Plasthall® DIDP is used in general performance applications that require a higher degree of permanence, greater than would be obtained by Plasthall® DOP.
| Acid Value, mg KOH / g | 0.005 |
| Appearance | Clear |
| Color, APHA | 10 |
| Refractive Index, 25°C | 1.484 |
| Moisture, % | 0.05 |
| Specific Gravity, 25°C | 0.964 |
| Packaging |
|
|---|
| Plasticizer, pphr | 67 |
| Shore A Hardness | 70 |
| Low Temperature Brittle Point, °C | -32 |
| Tensile Strength, psi | 2300 |
| Ultimate Elong., % | 405 |
| Percent Change by: | |
| Volatilization | -3.3 |
| Oil extraction | -21 |
| Hexane Extraction | -35 |
| Distilled water extraction | -1.1 |
| Soapy water extraction | -5.9 |
| High humidity | -1.0 |
| Migration | |
| Polystyrene | Good |
| ABS | Good |
| Plasticizer, pphr | 20 |
| Shore A Hardness | 57 |
| Low Temperature Brittle Point, °C | -33 |
| Tensile Strength, psi | 2050 |
| Ultimate Elong., % | 635 |
| Percent Change by: | |
| Volatilization | -3.8 |
| ASTM #1 Oil | -10 |
| ASTM #3 Oil | 3.5 |
| Distilled water extraction | 3.4 |
The information presented herein is believed to be accurate and reliable, but no warranty or guarantee, expressed or implied, is made regarding the information or the performance of any product. Further, nothing contained herein shall be taken as any inducement or recommendation to use, manufacture or sell that may infringe any patents or any other proprietary rights now or hereafter in existence, nor to imply compliance with any regulatory requirements
The Hallstar Company - 120 South Riverside Plaza Suite 1620 - Chicago, IL 60606-3911 USA
Tel.: 877 427 4255 (International n.: +1 312 385 4494) - Fax: +1 330 929 3616 - E-mail: customerservice@hallstar.com Web Site: hallstar.com
© 2026 Hallstar. All Rights Reserved.
Distributor Login
Print 
PDF