Hydrogenated Nitrile Butadiene (HNBR)

Phthalate Replacement +

Food Compliance +

Brand +

45 results

PARAPLEX® A-8600

PARAPLEX A-8600 is one product in a series of polymeric plasticizers that utilizes the PARAPLEX APPROACH. The PARAPLEX APPROACH is a molecular design system that HallStar has developed to characterize and sythesize solutions to very tight performance requirements.

PARAPLEX® A-8210

PARAPLEX A-8210 is one product in a series of polymeric plasticizers that utilizes the PARAPLEX APPROACH. The PARAPLEX APPROACH is a molecular design system that HallStar has developed to characterize and synthesize solutions to very tight performance requirements.

PLASTHALL® S-73

Plasthall S-73 is a highly efficient epoxy ester plasticizer that provides effective heat and light stability and low temperature flexibility.

PLASTHALL® TOTM

Plasthall TOTM is a relatively higher molecular weight monomeric ester. TOTM imparts exceptional volatity resistance and resistance to polar and non-polar fluids.

HALLCOMAG® BEADS

HALLCOMAG BEADS is a magnesium oxide with a naphthenic process oil binder that offers protection against degradation by moisture and carbon dioxide. This physical form is free flowing, and essentially dust-free. In some applications, HALLCOMAG BEADS can be used as a pound for pound replacement for powdered magnesium oxide.

MONOPLEX® DOS

MONOPLEX DOS (di-2-ethylhexyl sebacate) offers low volatility high plasticizing efficiency excellent resistance to extraction by water soaps and detergents and excellent flexibility at low temperatures.

PARAPLEX® A-8000

PARAPLEX A-8000 is one product in a series of polymeric plasticizers that utilize the PARAPLEX APPROACH. The PARAPLEX APPROACH is a molecular design system that HallStar has developed to characterize and synthesize solutions to very tight performance requirements.

PARAPLEX® G-30

PARAPLEX G-30 is a low molecular weight polymeric plasticizer which offers a good balance of permanence properties. G-30 has better compatibility than other polymeric plasticizers. When service conditions include high humidity high temperature and exterior exposure G-30 would be a good choice.

PLASTHALL® 226 DBEEA

Plasthall 226 – DBEEA is used primarily for nitrile rubber and is a very good for both low and high temperature properties.

PLASTHALL® 297

Plasthall 297 is a monomeric ester designed to impart excellent low temperature flexibility to PVC film sheet and coatings.

PLASTHALL® 4141

Plasthall 4141 is a monomeric plasticizer that exhibits extremely good compatibility with practically all types of synthetic rubber offering low volatility with high efficiency and low temperature properties.

PLASTHALL® 7050

Plasthall 7050 is a monomeric plasticizer that exhibits extremely good compatibility with practically all types of natural and synthetic rubber.

PLASTHALL® 8-10 TME

Plasthall 8-10 TME provides the highest volatility resistance in PVC compounds and excellent permanence in higher polarity fluids.

PLASTHALL® DOS

Plasthall DOS is a monomeric ester. DOS offers excellent low temperature performance high plasticizing efficiency low volatility and excellent polar fluid extraction resistance.

PLASTHALL® DTDA

Plasthall DTDA is a low polarity dibasic adipate ester that has utility as a lubricant or a plasticizer for low polarity polymers.

PLASTHALL® P-7092

Plasthall P-7092 is an intermediate molecular weight polyester. P-7092 has excellent outdoor exposure low volatility and good overall extraction resistance.

PLASTHALL® P-900

Plasthall P-900 has been shown to provide a superior hydrophilic surface. Compounds containing P-900 are excellent candidates for water side print roll applications. Plasthall P-900 is also effective in plasticizing copolymer emulsions used in adhesive formulating.

PLASTHALL® PR-A126

Plasthall PR-A126 is an effective phthalate replacement in nitrile, urethane, polyacrylate and epichlorohydrin over a broad range of temperatures.

PLASTHALL® PR-LCOA

Plasthall® PR- LCOA is a low molecular weight, long chain oligomer highly recommended as a phthalate alternative in PVC and Nitrile rubber.

PLASTHALL® RP-1020

Plasthall RP-1020 is a low molecular weight reactive ester for a variety of elastomers.

SUPRMIX® 1312 LV

SUPRMIX® 1312 LV ends the handling problems associated with high viscosity by our putting the material on an amorphous silica carrier. SUPRMIX® 1312 LV is a low viscosity grade. SUPRMIX® 1312 LV provides all the benefits without the necessity for heating the liquid to make it more easily handled and weighed. SUPRMIX® 1312 LV is a free flowing, powdered dispersion that speeds mixing. SUPRMIX® 1312 LV is used in molded and extruded products, covered rolls, plastisols, and adhesives.

SUPRMIX® 140

SUPRMIX® 140 is a low viscosity trialky phosphate that acts as a plasticizer and a flame retardant. SUPRMIX® 140 may retard cure with high loadings. SUPRMIX® 140 aids in filler dispersion thereby reducing pigment loadings in colored compounds.

SUPRMIX® 900

SUPRMIX® 900 provides a hydrophilic surface to improve the water film on the surface of the roller. SUPRMIX® 900 is also effective in plasticizing copolymer emulsions used in adhesive formulating.

SUPRMIX® CUMAR® P-10

SUPRMIX® CUMAR® P-10 coumarone-indene resin offers multiple benefits to the rubber compounder. In mixing and extruding, SUPRMIX® CUMAR® P-10 low softing point allows it to function as plasticizer to help lower high viscosities, produce smoother extrusions. This compound provides building tack and green strength to unvulcanized rubber to allow the uncured parts to hold some rigidity and shape.

SUPRMIX® CUMAR® P-25

SUPRMIX® CUMAR® P-25 is a highly absorbent carrier with results of easier handling, weighing, faster mixing cycles and improved dispersion of the resin. SUPRMIX® CUMAR® P-25 also leaves no thick residues in the bottoms of nearly empty drums with which to contend during drum disposal and cleaning/re-conditioning.
Suprmix® CUMAR®P-25 is resistant against oxidation, moisture, dilute acids and caustics. Green strength and building tack are retained.

SUPRMIX® D-148® DRY

SUPRMIX® D-148 eliminates the problems in weighing and the need to scrape out the weighing container during the mixing cycle by our incorporating the D-148 process aid on our amorphous silica carrier to make a free flowing powder dispersion. SUPRMIX® D-148 can be used effectively in place of several higher priced products. It is neutral in most cure systems and contains no waxes or silicones to affect adhesion or bonding qualities. It is highly compatible in SBR, CR and is also useful in natural rubber and EPDM.

SUPRMIX® DAP

SUPRMIX® DAP solves the handling, weighing, and mixing problems because HallStar uses an amorphous silica carrier that turns the liquid into a free flowing powdered dispersion.

SUPRMIX® EPON® 828

SUPRMIX® EPON® 828 is a dispersion of this extremely useful, but viscous liquid on our amorphous silica carrier. The result is a free flowing, easy-to-handle powder that incorporates quickly into rubber compounds. SUPRMIX® EPON® 828 is used as a tackifier, cross-linker and adhesion promoter in rubber, coatings, composites, chemical resistant tank linings, grouts, electrical applications, construction, castings, flooring, concrete, adhesion formulations and many other uses too numerous to list.

SUPRMIX® PARAPLEX® A-8600

SUPRMIX® PARAPLEX® A-8600 is a medium molecular weight polymeric ester, which provides a permanent plasticizer with superior humidity and extraction resisitance.

SUPRMIX® PARAPLEX® G-25

SUPRMIX® PARAPLEX® G-25. We put our own Paraplex® G-25 on our amorphous silica carrier to make a free-flowing powdered dispersion. All of those benchmark properties of HallStar’s Paraplex® G-25: permanence; compatibility; retention of physical properties at prolonged service at high temperatures; excellent resistance to extraction in/by gasoline, oils, detergents and soapy water; and freedom from migration into plastics, rubber, lacquers, alkyds, and varnish finishes are retained —- just in a form that is remarkably convenient to handle, weigh, and mix.

SUPRMIX® PARAPLEX® G-30

SUPRMIX® PARAPLEX® G-30 is a low molecular weight polyester dispersed on an amorphous silica carrier. SUPRMIX® PARAPLEX® G-30 provides a free flowing, easy to handle powder that incorporates quickly into rubber compounds and offers good balance performance properties at low cost. SUPRMIX® PARAPLEX® G-30 shows exceptional compatibility with vinyl resins over a wide range of environmental conditions; high humidity, high temperature, and exterior exposure.

SUPRMIX® PARAPLEX® G-41

SUPRMIX® PARAPLEX® G-41 we put our Paraplex G-41 on our amorphous silica carrier to make a free-flowing powdered dispersion. All of those special properties of HallStar’s Paraplex G-41 are still there: permanence; compatibility; retention of physical properties at prolonged service at high temperatures; excellent resistance to extraction in/by gasoline, oils, detergents and soapy water; and freedom from migration into plastics, rubber, lacquers, alkyds, and varnish finishes are retained — but now in a form that is remarkably convenient to handle, weigh and mix.

SUPRMIX® PARAPLEX® G-50

Suprmix® Paraplex® G-50 is an extremely versatile polymeric adipate plasticizer. It has been recognized for decades as an ideal material for such various flexible PVC applications as vinyl coated fabrics, decals, and laminates. Suprmix Paraplex G-50 is a free-flowing powdered dispersion, that is remarkably convenient to handle, weigh, and mix.

SUPRMIX® PARAPLEX® G-54

SUPRMIX® PARAPLEX® G-54 is a intermediate molecular weight polyester adipate dispersed on an amorphous silica carrier. SUPRMIX® PARAPLEX® G-54 provides a free flowing easy to handle powder that incorporates quickly into rubber compounds.

SUPRMIX® PARAPLEX® G-59

Suprmix® Paraplex® G-59 is an intermediate molecular weight polyester adipate dispersed on an amorphous silica carrier. Suprmix® Paraplex® G-59 provides a free flowing easy to handle powder that incorporates quickly into rubber compounds, that are remarkably convenient to handle, weigh, and mix.

SUPRMIX® PLASTHALL® 226 (DBEEA

SUPRMIX Plasthall 226(DBEEA) is a compound consisting of 72% Plasthall 226 and 28% substrate. SUPRMIXes permit liquids to be handles as powders. As SUPRMIX is incorporated into a rubber compound the active ingredient is released from its carrier allowing the active ingredient to function in the same manner as it would if it had been incorporated as a neat material.

SUPRMIX® PLASTHALL® A-9000

SUPRMIX® PARAPLEX® A-9000 provides the excellent extraction resistance to polar fluids, humid environments, making it well suited for outdoor applications and rubber roller. SUPRMIX® PARAPLEX® A-9000 compared to most monomeric plasticizers, offers better permanence, and resistance to volatility and migration — making the product a better-performing, more cost-effective substitution in a lot of cases.

SUPRMIX® PLASTHALL® DBS

Suprmix® PlastHall® DBS a free-flowing powder by using our amorphous silica carrier, weighing, delivery, and incorporation headaches are minimized. Suprmix® PlastHall® DBS is so efficiently incorporated during the mixing steps that often the PHR (Parts per Hundred Rubber) level can be reduced while the same physicals and durometer hardness are retained

SUPRMIX® PLASTHALL® P-7092

SUPRMIX Plasthall P-7092 is an intermediate molecular weight polyester glutarate dispersed on an amorphous silica carrier. SUPRMIX Plasthall P-7092 provides a free flowing easy to handle powder that incorporates quickly into rubber compounds.

SUPRMIX® SR-172

SUPRMIX SR-172 is a compound consisting of 72% SR-172 and 28% substrate. SUPRMIXes permit liquids to be handled as powders. As SUPRMIX is incorporated into a rubber compound the active ingredient is released from its carrier allowing the active ingredient to function in the same manner as it would if it has been incorporated as a neat material.

TegMeR® 804 SPECIAL

TegMeR 804 SPECIAL is tetraethylene glycol ester plasticizer for high polarity elastomers and plastics. This plasticizer has excellent compatibility in acrylic resins.

TegMeR® 809

TEGMER 809 is a PEG 400 ester plasticizer for high polarity elastomers and plastics. This plasticizer offers good resistance to water extraction and good low temperature properties.

TegMeR® 810

TegMer 810 is a glycol ester offering excellent compatibility in acrylic (PMMA) nitrile rubber and polychloroprene.

TegMeR® 812

TegMeR 812 is a glycol ester offering excellent compatibility in acrylic rubber.

TP-759®

TP-759™ is a mixed ether ester type plasticizer with the best combination of low temperature and high temperature resistance.

We’re sorry. There are no products that match your selected specifications. Please revise your search criteria or contact us to submit a request for custom technology.

Submit your request now.