Distributor Login
  • Sample Requests
  • Contact Us
Hallstar
  • Solutions
  • Expertise
  • Resource Center
  • Sustainability
  • News & Events
Print Friendly Version of this pagePrint Get a PDF version of this webpagePDF

PLASTHALL® 100

Common Name: ISOOCTYL TALLATE
Product Code: 3559
Brand: Plasthall®

  • Description
  • Typical Properties
  • Performance Properties
  • Global Compliance
  • Used In

Plasthall 100 is the monoester isooctyl tallate. It has excellent compatibility in polychloroprene as well as chlorosulfonated polyethylene and natural rubber. In polychloroprene, Plasthall 100 offers good transmission fluid and water resistance and very good low temperature performance.

Acid Value, mg KOH / g 0.5
Appearance clear
Color, Gardner 4
Moisture, % 0.05
Refractive Index, 25°C 1.459
Saponification Value 142
Specific Gravity, 25°C 0.872
Viscosity at 25°C, cPs 12.5
Packaging
  • 55 gallon drum - 400lbs
  • 5 gallon pail - 37lbs
  • Tote - --lbs
  • Bulk - --lbs

Polychloroprene

Plasticizer, pphr 32.0
Shore A Hardness 66
Tensile Strength, psi 1500
Ultimate Elong., % 270
Low Temperature Brittle Point, °C -54
Air Oven Aging -1.5
Percent Change by: 
ASTM #1 Oil -9.5
ASTM #3 Oil +41
Distilled water +15
Transmission fluid extraction +4.2

Global Compliance:

  • EU
  • USA

Polymers:

  • Chlorosulfonated polyethylene
  • Natural rubber
  • Polychloroprene

Applications:

  • Automotive belts
  • Automotive molded parts
  • Automotive shoes & boots
  • Conveyor belts
  • Fuel hose
  • Gaskets
  • Hydraulic hose
  • Industrial hose & tubing
  • O-rings
  • Water seals
  • Wire & cable

The information presented herein is believed to be accurate and reliable, but no warranty or guarantee, expressed or implied, is made regarding the information or the performance of any product. Further, nothing contained herein shall be taken as any inducement or recommendation to use, manufacture or sell that may infringe any patents or any other proprietary rights now or hereafter in existence, nor to imply compliance with any regulatory requirements

The Hallstar Company - 120 South Riverside Plaza Suite 1620 - Chicago, IL 60606-3911 USA

Tel.: 877 427 4255 (International n.: +1 312 385 4494) - Fax: +1 330 929 3616 - E-mail: customerservice@hallstar.com Web Site: hallstar.com

Request a Sample

Safety Data Sheets

Product Documents

  • Effects of Ester Plasticizers on Neoprene Crystallization Rate
  • Environmental Impact of Using Suprmix® Versus Liquid
  • Ester Plasticizers for Elastomers
  • Ester Plasticizers in Hydrin
  • Food Contact Information Sheet – USA
  • Improved Processing with Powder Liquid Dispersions
  • New Line of Modifiers for Low Polarity Elastomers and Plastics
  • Plasticizers for PVC Foam
[Reset Filters]
  • Industrial Solutions
    • Elastomer Modifiers
    • Thermoplastic Modifiers
    • Adhesive/Sealant Modifiers
    • Coatings Modifiers
    • Other Market Solutions
    • Trends
  • Areas of Expertise
    • Renewable Plasticizers/Esters
    • Permanent Plasticizers
    • Phthalate Replacements
    • Custom Ester Design
    • Regulatory Understanding and Capability
  • Resource Center
    • Case Studies
    • Glossary of Terms
    • Technical Documents
    • Videos
  • Contact Us
    • Locations
    • Distributors
    • Careers

© 2025 Hallstar.  All Rights Reserved.

  • About Hallstar Corporate
  • Privacy & Cookies Statement
  • Privacy & Cookies Statement – Mandarin
  • Disclaimer